Browse all practice questions for the TFD Basic Hose Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

TFD Basic Hose Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the type of 5-inch couplings described?
  • What is the minimum length of 1¾ inch hose that should be on apparatus?
  • What should you inspect on a hose before use?
  • What does "water on" indicate?
  • Which hose type is used as the last section of hose on several packs?
  • Why should you keep the fireground team aware of line status during movement?
  • What is the Higbee Cut on 2½ inch couplings?
  • Where is the Higbee Indicator located on 2½ inch couplings?
  • What is the capacity per 50-foot section in cubic inches for the 1¾ inch hose?
  • How does nozzle elevation affect pump discharge pressure calculations?
  • The Front bumper load consists of which description?
  • What is the dry weight per 50-foot section of 2½ inch hose?
  • What material is the Gladiator hose liner made from?
  • What is the purpose of a gated wye?
  • Rolling Hose Orientation (Out-of-Service) begins with which coupling?
  • How many feet of booster line are carried on the fire department truck?
  • Which of the following is a typical cause of a line not delivering water?
  • What is the wildland hose test condition?
  • Which statement identifies a male coupling on a 5-inch hose?
  • What should you do if a hose line begins to spray water around the ground?
  • Which statement correctly describes nozzle pressure requirements for fog and smooth bore nozzles?
  • What is the construction of Gladiator hoses?
  • Which set of factors most influence friction loss in a hoseline?
  • In pump discharge pressure calculations, PDP stands for which term?
  • The Attack Pack is described as which of the following?
  • Which device is used to combine water from multiple outlets or feed multiple lines from one source?
  • 2½ inch hose couplings use which standard thread?
  • Which statement correctly describes Gladiator hose usage in pack configurations?
  • Which statement correctly describes how nozzle pressure and friction loss relate to pump discharge pressure?
  • What should you check when connecting a hose to a hydrant outlet?
  • Which brands are used for 1.75-inch and 2.5-inch hoses?
  • How does the number of bends affect friction loss?
  • How many total feet are in the 5-inch hose storage described as eight 100-foot sections plus 50' and 15' sections?
  • What is the maximum operating pressure for 1¾- and 2½-inch hoses during testing?
  • What is the most common mechanical damage?
  • What does heat damage do?
  • How can you identify a female coupling on a 5-inch hose?
  • How should hose be stored?
  • Which factor directly affects friction loss in a hose line?
  • For Rolling Hose Orientation In-Service, which option correctly describes the starting action?
  • Which lengths are available for 5-inch synthetic hose?
  • Why should hydrants be opened gradually?
  • What is appliance loss?
  • How is nozzle pressure defined?
  • How can you identify a male coupling on a 5-inch hose?
  • What is the role of gear and equipment in hose operations?
  • Which is a mechanical damage cause?
  • Which of the following is a listed type of TFD hose?
  • What is the purpose of a preconnect line that is charged on arrival?
  • Which of the following is NOT a listed use for 2½ inch hose? (Final)
  • What action should you take after relieving pressure when addressing a line issue to prevent reoccurrence?
  • What should you do if a line stops delivering water?
  • A 100-foot section of 5-inch hose holds approximately how many gallons of water?
  • How do you maintain and clean couplings?
  • Before reloading N-Dura, what must be done?
  • On a 5-inch hose, what does the marking at 50 feet look like?
  • Which device is used to split one line into two separate lines feeding different branches?
  • What is the full (wet) weight per 50-foot section of 2½ inch hose?
  • How should the nozzle operator announce changes in water flow or pattern?
  • In reverse lay, describe water supply hose placement.
  • In forward lay, which statement best describes the placement of the supply hose?
  • Which statement describes the function of a backflow preventer in hose operations?
  • How does a hose coupling wrench assist on the scene?
  • Which color denotes all other hose?
  • What color denotes Attack Pack #1?
  • Which statement best describes the back-up line's role?
  • Which statement correctly identifies 5-inch coupling type options?
  • Which actions help detect leaks after charging a line?
  • Hose service life per NFPA standard?
  • How do you clean hose?
  • What is the purpose of the Higbee Cut on 2½ inch couplings?
  • What is the thread count per inch for 2½ inch coupling threads?
  • Which option correctly states the starting action for in-service rolling hose orientation when comparing to out-of-service orientation?
  • Which statement best describes wildland hose jacket configuration?
  • What is the full weight per 100-foot section of 5-inch hose, including water?
  • A skid load consists of which portion of hose?
  • Gladiator hose is the last section of hose on which packs?
  • What is a cross-lay?
  • How does a smooth bore nozzle differ from a fog nozzle?
  • What is the purpose of a back-up line in practice?
  • What should you inspect on a hose coupling gasket?
  • What are two common hose loads for preconnected lines?
  • What is the test pressure for 1¾ and 2½ inch hoses?
  • What is the recommended response to water hammer?
  • 1¾ inch hose sections are manufactured in what length?
  • How should you communicate while advancing a line?
  • What are the three categories of hose damage?
  • Which of the following is NOT a listed use for 2½ inch hose?
  • Which statement describes the Gladiator hose in this context?
  • When would you choose a 2-1/2 inch line over a 1-3/4 inch line?
  • Why is it important to keep hoses free of slack and knots?
  • What is the main advantage of a cross-lay?
  • What is the purpose of charging a preconnect line on arrival at the scene?
  • Where is the Higbee Indicator found on 2½ inch couplings?
  • What do kinks in a hose do to flow?
  • Which statement about the capacity of the 1¾ inch hose in gallons per 50-foot section is true?
  • What are the benefits of Gladiator hose?
  • What is the minimum length on apparatus for 2½ inch hose?
  • Which option correctly states the starting coupling order for in-service rolling hose orientation compared with out-of-service?
  • What hose is always behind the nozzle?
  • From dry to full, how much weight does a 50-foot 1¾ inch hose gain?
  • Which statement correctly describes the 25-foot and 50-foot markings on a 5-inch hose?
  • How is Gladiator hose identified?
  • Which statement about 5-inch coupling pressure ratings is true?
  • What is the primary use of 5-inch hose?
  • Which of the following is NOT a listed use for 2½ inch hose?
  • When should a hose be retired from service due to damage?
  • The skid load uses which length and diameter?
  • What is the purpose of nozzle pattern control?
  • Hose testing frequency?
  • Rolling Hose Orientation (In-Service) begins with which coupling?
  • Which of the following is true about Gladiator being the last section of hose?
  • What does chemical damage do?
  • A backup line is best described as which?
  • What are the manufactured lengths of 5-inch synthetic hose?
  • What material composes 5-inch synthetic hose construction?
  • 1¾ inch hose couplings are what type and thread count?
  • Which color denotes Front Bumper hose?
  • If you have a 100-foot length of 1¾ inch hose, how many standard 50-foot sections does it contain?
  • What is the capacity of a 50-foot section of 2½ inch hose?
  • In the 5-inch hose 65' storage configuration, what are the lengths of the Captain and Engineer sections?
  • Can Gladiator hose be reloaded wet?
  • Which statement describes when an air purge should be performed?
  • Hard suction hose is used on which equipment?
  • What is the main risk if hydrants are opened too quickly?
  • Booster Line (Redline) is constructed as which of the following?
  • What is the test duration for 5-inch and Wildland hoses?
  • What is the diameter of Booster Line (Redline)?
  • What is the dry weight per 50-foot section of 1¾ inch hose?
  • Booster Line is commonly referred to by what color name?
  • How do you check for leaks after charging a line?
  • Which of the following is NOT listed as a type of TFD hose?
  • The last section of hose on transverse, Minuteman, and attack packs is which type of hose?
  • Gladiator is the last section on which packs?
  • Rolling Hose Orientation (Out-of-Service) begins with which coupling?
  • Which load is used on pre-connect transverse lines and some front bumper loads?
  • How does a backflow preventer function in hose operations?
  • What is pump discharge pressure?
  • Which statement correctly describes how a nozzle operator should communicate changes in water flow or pattern?
  • Which of the following is not listed as a use for the 1¾ inch hose?
  • What is the overall objective of practicing hose operations?
  • What is the recommended stance for nozzle control?
  • What benefit does keeping hoses free of slack and knots provide during hose advancement?
  • What are the marking intervals for 5-inch hose measurements?
  • What is the difference between drafting and hydrant supply?
  • What is the dry weight per 100-foot section of 5-inch hose?
  • Rocker lugs are used for tightening with which tool?
  • What color is Minuteman hose?
  • What is the recommended connection method for 5-inch couplings?
  • Which standard defines fire hose standards?
  • How should hoses be dried and stored after use?
  • Rolling Hose Orientation (Out-of-Service) begins with which coupling?
  • Which of the following lists the three most common attack line sizes?
  • Booster line hose lengths are manufactured in which lengths?
  • Flat Load sizes include which of the following?
  • N-Dura Hose Construction is described as having which property?
  • What is the risk of pumping too high a nozzle pressure for a given line?
  • How many firefighters are typically needed to safely advance a charged line?
  • Forward lay is used to bring water to the pump from a hydrant toward which component?
  • Which are the listed uses for the 1¾ inch hose?
  • Which factors influence friction loss in a hose line?
  • What is a common symptom of an air leak in a line?
  • According to NFPA standards, what is the service life range for hoses?
  • What material is used for wildland hose construction?
  • Which statement correctly describes wildland hose jacket configuration?
  • Rocker lugs on 2½ inch hose couplings are used for tightening with a spanner wrench.
  • Which option correctly matches the orientation type with its starting coupling?
  • In forward lay in water supply operations, which describes the placement of the supply hose?
  • What is an air purge and when is it used?
  • Which option best describes wildland hose construction?
  • What is the test pressure for 5-inch and Wildland hoses?
  • In calculating pump discharge pressure, friction loss is added to which value?
  • Which situation indicates you should stop and inspect a hose line for damage before proceeding?
  • What is the pump operator responsible for with respect to hose lines?
  • What is the exact test pressure and duration for the wildland hose test?
  • What is the purpose of hose couplings?
  • What is described as the coupling assembly safety tip?
  • In a flat load, where does the hose start?
  • What is the most common chemical damage?
  • A Siamese connection is used for what purpose?
  • What is a Storz coupling and its benefit on the fireground?
  • What color is the 150 foot Transverse hose?
  • The thread-per-inch specification for the 1¾ inch hose couplings is what?
  • Which symptom indicates heat damage has occurred to a hose?
  • Booster line sections are equipped with which type of couplings?
  • What are the pressure ratings and test duration for 5-inch coupling?
  • What is the full weight per 50-foot section of 1¾ inch hose?
  • What is a backup line?
  • How are the markings on 5-inch hose indicated?
  • What action is best to ensure a steady stream when charging a new or relocated line?
  • What constitutes heat damage to a hose and what do you do?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy